 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ST626XC-KIT STARTER KIT FOR ST625x and ST626x MCUs HARDWARE FEATURES s SOFTWARE FEATURES s s s s s s s Immediate evaluation of all ST625x and ST626x devices, with demonstration examples. Software debugging within the user's real application environment. In-Socket Programming of all EPROM and OTP ST625x and ST626x (DIP packages). In-Circuit programming of all EPROM and OTP ST625x and ST626x devices on the user's application board (all packages). Software simulator including I/O read/write. Assembler, linker, debugger. OTP and EPROM programming utilities. Application examples and demonstrations. October 2000 This is advance information from STMicroelectronics. Details are subject to change without notice. 1/4 635 ST626XC-KIT The Starter Kit Board The Starter Kit board includes the following resources: * * * * * * * Reset and data control buttons. LED indicators. Resistance trimmer. Analog to digital converter. Audio transducer circuit. RS-232 interface. Demonstration program selector jumpers. * * * * Voltage: 16V min./20V max. Current: 100 mA min. It includes the following connectors: * A parallel port connector (P1) for connection to the host PC when it is used as a hardware simulator or for programming. A remote resource I/O interface connector (J2) to which you can connect your own hardware resource. An RS-232 connector, which you can use for observing RS-232 communication control using an ST6. A connector for your own in-circuit ST6 programming board. It comes with its own power supply unit that can be plugged into an AC mains source, or a DC source with the following characteristics: * 2/4 636 ST626XC-KIT The following diagram shows the layout of the Starter Kit board. 1 2 3 4 5 6 7 8 9 10 In-circuit programming connector (J1). 8 Mhz Oscillator. "ST6260/62" or "ST6265" device selection jumpers W10 to W13. PC connector P1. Audio Transducer circuit. 10 K trimmer. Power supply JACK connector J3. Power supply connector J4. Power supply LED indicator LD6. "+" and "-" buttons. 20 19 18 17 16 15 14 13 12 11 DIL-16 ZIF MCU socket Digital to analog conversion circuit. "Programming" or "User" operating mode selection jumpers W1 and W2. Five LED level indicators including jumpers W4 to W8. DIL 20-28 ZIF MCU socket. Remote resource I/O interface connector J2. RS232 interface circuit and connector. Demonstration routine selector. Thermistor including jumper W24. RESET button. 1 2 3 4 5 6 7 8 9 10 + W 10 W15 W 13 W17 W18 W22 W23 W24 W1 W2 W4 20 19 18 17 16 15 14 W21 W25 W26 13 12 W31 11 3/4 637 ST626XC-KIT * Figure 1. Block Diagram of the Starter Kit board POWER SUPPLY UNIT DAC TRANSDUCER LEDs THERMISTOR TRIMMER RS232 P2 J3 J4 ST62E65 PARALLEL CONNECTION TO PC AND SOFTWARE SIMULATOR P1 ST626x I/O CONNECTION J2 USER APPLICATION EPROM PROGRAMMER IN-CIRCUIT PROGRAMMING J1 ORDERING INFORMATION Sales Type ST626XC-KIT/UK ST626XC-KIT/US ST626XC-KIT/EU Description Starter Kit for ST625x and ST626x MCUs for operation in United Kingdom Starter Kit for ST625x and ST626x MCUs for operation from 110 Vac mains Starter Kit for ST625x and ST626x MCUs for operation from 220 Vac mains Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without the express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics (c)2000 STMicroelectronics - All Rights Reserved. Purchase of I2C Components by STMicroelectronics conveys a license under the Philips I2C Patent. Rights to use these components in an I2C system is granted provided that the system conforms to the I2C Standard Specification as defined by Philips. STMicroelectronics Group of Companies Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 4/4 638 |
Price & Availability of ST626XC-KIT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |